Sacramento City College
Open tablet menu Close tablet menu×
Open mobile menu Close mobile menu×
Home Catalog Programs of Study List of Programs Mechanical-Electrical Technology

Mechanical-Electrical Technology

Overview

The Mechanical Electrical Technology Department teaches courses in the design, installing, operating and maintenance of heating, ventilating, air conditioning, and refrigeration systems. The Mechanical-Electrical Department is committed to providing educational opportunities for current and future workforce needs. We strive to maintain the highest educational standards in the Air Conditioning, Heating, Ventilation, Refrigeration, Environmental Control, Building Automation, Renewable and Sustainable Energy, as well as Energy Efficiency and Management.

Degrees and Certificates Offered

  • A.S. in Mechanical-Electrical Technology
  • Mechanical Systems Technician Certificate
  • Mechanical-Electrical Technology Certificate

Associate Degree

A.S. in Mechanical-Electrical Technology

MET Program Information

The Mechanical-Electrical Technology (MET) program provides instruction in design, installation, operation, repair, and maintenance of a wide range of mechanical and electrical equipment from small residential equipment to large commercial and industrial facilities. The entire spectrum of mechanical and electrical systems is covered including energy management, mechanical system commissioning, indoor air quality, building automation systems, refrigerant recovery and management, electrical controls, pneumatic controls, electronic controls, instrumentation, and heat pumps. These systems include heating, ventilating, air conditioning, and refrigerating (HVAC/R).

Students will learn the theory and fundamentals of mechanical equipment and be exposed to hands-on training in sophisticated training laboratories. Laboratory equipment that students will work with include a water cooled chiller, cooling towers, steam and hot water boilers, thermal energy storage system, heat reclaim system, power management system, packaged and split system air conditioners, furnaces, and high, medium, and low temperature refrigeration systems. Students will also configure, program, and commission several Direct Digital Control (DDC) Systems, pneumatic systems, variable frequency drive (VFD), and programmable logic controllers (PLC), and work directly on the operating systems in the laboratory facility.

The program includes both day and evening lecture and laboratory class sections. Classes are conducted as both lecture and laboratory. Effective writing, verbal communication, electronic communication, sketching, drafting, mechanical calculations, and computer skills are emphasized across the curriculum.

Recommended High School Preparation

Completion of college preparatory English and general mathematics courses is highly desirable but not required. Courses in drafting, algebra, and computer fundamentals will be beneficial.

Program Costs

In addition to normal student expenses such as tuition and textbooks, MET students must purchase safety glasses for use in laboratory and shop classes. If this fee creates a financial burden, students should consult the Financial Aid Office for possible assistance.

Catalog Date: August 1, 2026

Degree Requirements
Course Code Course Title Units
HVAC 256 Fundamentals of Instruments and Electricity 1.5
HVAC 257 Fundamentals of Workplace Success 1.5
OEHS 110 Cal/OSHA 10 General Safety 1
HVAC 351 Basic Mechanical Systems 5
HVAC 352 Mechanical Systems Calculations 2
HVAC 357 Drawing Mechanical Systems 1
HVAC 360 Mechanical Systems Maintenance 1.5
HVAC 361 Refrigeration Systems 3
HVAC 362 Refrigeration Systems Calculations 3
HVAC 363 Refrigerant Transition and Recovery Processes and Procedures 1.5
HVAC 364 Electrical Controls 3
HVAC 371 Gas-Fired Heating Equipment 3
HVAC 372 Power Machinery, Heating and Air Conditioning Calculations 3
HVAC 373 Piping and Electrical Drafting and Blueprint Reading 3
HVAC 374 Automatic Control Systems I 3
HVAC 381 Air Conditioning 3
HVAC 383 Instrumentation 3
HVAC 384 Automatic Control Systems II 3
HVAC 388 Heat Pump Operation and Load Calculations 3
Total Units: 48

The Mechanical-Electrical Technology Associate in Science (A.S.) degree may be obtained by completion of the required program, and either (a) the Local General Education Pattern or (b) the California General Education Transfer Curriculum (Cal-GETC), plus sufficient electives for a total of at least 60 units. See SCC graduation requirements.

Student Learning Outcomes

Upon completion of this program, the student will be able to:

  • apply problem-solving and analytical thinking skills in the maintenance, operation, testing, troubleshooting, and repair of heating, cooling, and refrigeration systems, accessories, and controls.
  • utilize tools and equipment in the maintenance, operation, testing, troubleshooting, and repair of heating, cooling, and refrigeration systems, accessories, and controls.
  • demonstrate an understanding of the requirements of the Federal Refrigerant Transition and Recovery Certification license examination.
  • recognize the importance of proper handling of refrigerants and the environmental impact of improper refrigerant management.
  • operate and troubleshoot both a water boiler and low pressure steam boiler system, pumping and piping systems, and related heating equipment.
  • design a heating-cooling system for a residential and commercial application from concept to finish.
  • explain the operation of chilled water systems, air distribution, variable air volume systems, thermal storage, cooling towers, and energy management.
  • explain the concepts related to absorption air conditioning systems, helical-rotary, and centrifugal water chillers.
  • demonstrate an understanding of electrical circuits and controls.
  • design an electrical control schematic and troubleshoot various electrical equipment.
  • utilize freehand sketching and drafting skills for use in field applications.
  • demonstrate an understanding of the different types, applications, and proper use of instruments to measure and record temperature, humidity, flow, light, sound, velocity, pressure, combustion emissions, air quality, voltage, level, force, and vibration.
  • analyze complex systems of the automatic controls industries.
  • design and program Variable Frequency Drives, Programmable Logic Control systems, Direct Digital Control systems, and Pneumatic Control systems.
  • explain the theory and demonstrate practical skill sets required of an entry level Building Automation Systems Technician.
  • analyze manufacturer’s data of equipment performance and economic factors related to heating, cooling, and refrigeration equipment, and estimate the cost of a refrigeration system installation including materials, labor, and profit.
  • solve problems involving heat transfer, heating and cooling loads, air distribution, and psychrometrics of air.
  • evaluate and determine the need for periodic equipment maintenance and demonstrate an understanding of a maintenance contract.

Career Information

Upon completion of the MET program, students may find employment in the following industry sectors: government (federal, state, county, and city agencies), health care, commercial air conditioning and refrigeration service/repair, utilities, construction, facilities management, engineering, high technology, food production, and manufacturing. Typical job titles include: stationary engineer, air conditioning and refrigeration technician, maintenance mechanic, boiler operator, automatic control technician, wholesale and manufacturer’s sales representative.

Certificates of Achievement

Mechanical Systems Technician Certificate

The Mechanical Systems Technician Certificate of Achievement provides entry level instruction in design, installation, repair, and maintenance of a wide range of mechanical and electrical equipment from small residential equipment to light commercial buildings. The entry level skills covered included fundamental mechanical and electrical systems including indoor air quality, refrigerant recovery and management, electrical controls, and heat pumps.

Students will learn the theory and fundamentals of mechanical equipment and be exposed to hands-on training in sophisticated training laboratories. Laboratory equipment that students will work with includes high, medium, and low temperature refrigeration systems and electrical systems.

The program includes both day and evening lecture and laboratory class sections. Classes are conducted as both lecture and laboratory. Effective writing, verbal communication, electronic communication, mechanical calculations, and computer skills are emphasized across the curriculum.

Recommended High School Preparation

Completion of college preparatory English and general mathematics courses is highly desirable but not required. Courses in drafting, algebra, and computer fundamentals will be beneficial.

Program Costs

In addition to normal student expenses such as tuition and textbooks, MET students must purchase safety glasses for use in laboratory and shop classes. If this fee creates a financial burden, students should consult the Financial Aid Office for possible assistance.

Catalog Date: August 1, 2026

Certificate Requirements
Course Code Course Title Units
HVAC 256 Fundamentals of Instruments and Electricity 1.5
HVAC 257 Fundamentals of Workplace Success 1.5
OEHS 110 Cal/OSHA 10 General Safety 1
HVAC 351 Basic Mechanical Systems 5
HVAC 352 Mechanical Systems Calculations 2
HVAC 357 Drawing Mechanical Systems 1
HVAC 360 Mechanical Systems Maintenance 1.5
HVAC 361 Refrigeration Systems 3
HVAC 362 Refrigeration Systems Calculations 3
HVAC 363 Refrigerant Transition and Recovery Processes and Procedures 1.5
HVAC 364 Electrical Controls 3
Total Units: 24

Student Learning Outcomes

Upon completion of this program, the student will be able to:

  • evaluate and determine the need for periodic equipment maintenance, and demonstrate an understanding of a maintenance contract.
  • apply problem-solving and analytical thinking skills in the maintenance, operation, testing, troubleshooting and repair of heating, cooling, and refrigeration systems, accessories, and controls.
  • utilize tools and equipment in the maintenance, operation, testing, troubleshooting and repair of heating, cooling, and refrigeration systems, accessories, and controls.
  • demonstrate an understanding of the industry required Federal Refrigerant Transition and Recovery Certification license examination.
  • recognize and demonstrate the importance of proper handling of refrigerants and the environmental impact of improper refrigerant management.
  • explain the basic concepts of electrical circuits and control theory.
  • design an electrical control schematic and troubleshoot various electrical equipment.
  • utilize freehand sketching and drafting skills for field applications.
  • analyze manufacturer’s data of equipment performance and economic factors related to heating, cooling, and refrigeration equipment.
  • solve problems involving heating-cooling loads, heat transfer, air distribution, and psychrometrics of air.

Career Information

Upon completion of the Mechanical Systems Technician Certificate of Achievement, students will be qualified for employment in the following industry sectors: government (federal, state, county, and city agencies), health care, utilities, construction, engineering, high technology, food production, and manufacturing. Typical jobs titles include: utility engineer, maintenance mechanic, air conditioning and refrigeration technician, and wholesale and manufacturer’s sales representative.

Mechanical-Electrical Technology Certificate

MET Program Information

The Mechanical-Electrical Technology (MET) program provides instruction in design, installation, operation, repair, and maintenance of a wide range of mechanical and electrical equipment from small residential equipment to large commercial and industrial facilities. The entire spectrum of mechanical and electrical systems is covered including energy management, mechanical system commissioning, indoor air quality, building automation systems, refrigerant recovery and management, electrical controls, pneumatic controls, electronic controls, instrumentation, and heat pumps. These systems include heating, ventilating, air conditioning, and refrigerating (HVAC/R).

Students will learn the theory and fundamentals of mechanical equipment and be exposed to hands-on training in sophisticated training laboratories. Laboratory equipment that students will work with include a water cooled chiller, cooling towers, steam and hot water boilers, thermal energy storage system, heat reclaim system, power management system, packaged and split system air conditioners, furnaces, and high, medium, and low temperature refrigeration systems. Students will also configure, program, and commission several Direct Digital Control (DDC) Systems, pneumatic systems, variable frequency drive (VFD), and programmable logic controllers (PLC), and work directly on the operating systems in the laboratory facility.

The program includes both day and evening lecture and laboratory class sections. Classes are conducted as both lecture and laboratory. Effective writing, verbal communication, electronic communication, sketching, drafting, mechanical calculations, and computer skills are emphasized across the curriculum.

Recommended High School Preparation

Completion of college preparatory English and general mathematics courses is highly desirable but not required. Courses in drafting, algebra, and computer fundamentals will be beneficial.

Program Costs

In addition to normal student expenses such as tuition and textbooks, MET students must purchase safety glasses for use in laboratory and shop classes. If this fee creates a financial burden, students should consult the Financial Aid Office for possible assistance.

Catalog Date: August 1, 2026

Certificate Requirements
Course Code Course Title Units
HVAC 256 Fundamentals of Instruments and Electricity 1.5
HVAC 257 Fundamentals of Workplace Success 1.5
OEHS 110 Cal/OSHA 10 General Safety 1
HVAC 351 Basic Mechanical Systems 5
HVAC 352 Mechanical Systems Calculations 2
HVAC 357 Drawing Mechanical Systems 1
HVAC 360 Mechanical Systems Maintenance 1.5
HVAC 361 Refrigeration Systems 3
HVAC 362 Refrigeration Systems Calculations 3
HVAC 363 Refrigerant Transition and Recovery Processes and Procedures 1.5
HVAC 364 Electrical Controls 3
HVAC 371 Gas-Fired Heating Equipment 3
HVAC 372 Power Machinery, Heating and Air Conditioning Calculations 3
HVAC 373 Piping and Electrical Drafting and Blueprint Reading 3
HVAC 374 Automatic Control Systems I 3
HVAC 381 Air Conditioning 3
HVAC 383 Instrumentation 3
HVAC 384 Automatic Control Systems II 3
HVAC 388 Heat Pump Operation and Load Calculations 3
Total Units: 48

Student Learning Outcomes

Upon completion of this program, the student will be able to:

  • apply problem-solving and analytical thinking skills in the maintenance, operation, testing, troubleshooting, and repair of heating, cooling, and refrigeration systems, accessories, and controls.
  • utilize tools and equipment in the maintenance, operation, testing, troubleshooting, and repair of heating, cooling, and refrigeration systems, accessories, and controls.
  • demonstrate an understanding of the requirements of the Federal Refrigerant Transition and Recovery Certification license examination.
  • recognize the importance of proper handling of refrigerants and the environmental impact of improper refrigerant management.
  • operate and troubleshoot both a water boiler and low pressure steam boiler system, pumping and piping systems, and related heating equipment.
  • design a heating-cooling system for a residential and commercial application from concept to finish.
  • explain the operation of chilled water systems, air distribution, variable air volume systems, thermal storage, cooling towers, and energy management.
  • explain the concepts related to absorption air conditioning systems, helical-rotary, and centrifugal water chillers.
  • demonstrate an understanding of electrical circuits and controls.
  • design an electrical control schematic and troubleshoot various electrical equipment.
  • utilize freehand sketching and drafting skills for use in field applications.
  • demonstrate an understanding of the different types, applications, and proper use of instruments to measure and record temperature, humidity, flow, light, sound, velocity, pressure, combustion emissions, air quality, voltage, level, force, and vibration.
  • analyze complex systems of the automatic controls industries.
  • design and program Variable Frequency Drives, Programmable Logic Control systems, Direct Digital Control systems, and Pneumatic Control systems.
  • explain the theory and demonstrate practical skill sets required of an entry level Building Automation Systems Technician.
  • analyze manufacturer’s data of equipment performance and economic factors related to heating, cooling, and refrigeration equipment, and estimate the cost of a refrigeration system installation including materials, labor, and profit.
  • solve problems involving heat transfer, heating and cooling loads, air distribution, and psychrometrics of air.
  • evaluate and determine the need for periodic equipment maintenance and demonstrate an understanding of a maintenance contract.

Career Information

Upon completion of the MET program, students may find employment in the following industry sectors: government (federal, state, county, and city agencies), health care, commercial air conditioning and refrigeration service/repair, utilities, construction, facilities management, engineering, high technology, food production, and manufacturing. Typical job titles include: stationary engineer, air conditioning and refrigeration technician, maintenance mechanic, boiler operator, automatic control technician, wholesale and manufacturer’s sales representative.

Mechanical-Electrical Technology (MET) Courses

MET 250 Introduction to Mechanical-Electrical Technology

  • Units:1
  • Hours:18 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2026

This introductory course is designed for potential heating, ventilation, and air conditioning/refrigeration (HVAC/R) career professionals such as stationary engineers, commercial refrigeration technicians, commercial HVAC/R control technicians, and residential air conditioning technicians. In this course, students will explore the available career opportunities, be introduced to the fundamentals of refrigeration and technical math associated with this field, and learn the requirements for a certificate in Commercial Building Energy Auditing and Commissioning Specialist, Mechanical-Electrical Technology, Mechanical Systems Technician, and completing the Associate in Science degree in Mechanical-Electrical Technology. A final grade of "C" or better is necessary to move on to MET 256, 257, 351, and 352.

MET 256 Fundamentals of Instruments and Electricity

  • Units:1.5
  • Hours:18 hours LEC; 27 hours LAB
  • Prerequisite:HVAC 250 with a grade of "C" or better
  • Advisory:HVAC 257, 351, and 352 with grades of "C" or better; or concurrent enrollment in MET 257, MET 351, and MET 352.
  • Catalog Date:August 1, 2026

This course introduces the student to the fundamentals of electrical instruments and concepts required in commercial and industrial practice. Units of instruction include: fundamentals of electricity, Ohms law, use of voltmeters, ammeters, ohmmeters, series and parallel circuits, wiring diagrams, and electromagnetic theory. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 257 Fundamentals of Workplace Success

  • Units:1.5
  • Hours:27 hours LEC
  • Prerequisite:HVAC 250 with a grade of "C" or better
  • Advisory:MET 256, MET 351 and MET 352 with a grade of "C" or better or concurrent enrollment in MET 256, MET 351 and MET 352.
  • Catalog Date:August 1, 2026

This course provides the student with basic workplace skills needed to enter the workforce as a machinery systems technician. Units of instruction include teamwork, ethics, diversity, communication skills, writing e-mail messages, Internet websites, conflict resolution, critical thinking, problem solving, conflict resolution, career management, sexual harassment, and drug and alcohol use. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 294 Topics in Mechanical-Electrical Technology

  • Units:0.5 - 4
  • Hours:9 - 18 hours LEC
  • Prerequisite:None.
  • Catalog Date:August 1, 2026

This is an individualized course developed in cooperation with industry to meet specialized training needs.

MET 295 Independent Studies in Mechanical - Electrical Technology

  • Units:1 - 3
  • Hours:54 - 162 hours LAB
  • Prerequisite:None.
  • Catalog Date:August 1, 2026

This course is designed to provide student’s additional on-hands experience in the Mechanical Electrical Technology related disciplines. To be eligible for independent study, students must be currently enrolled in at least one Mechanical-Electrical Technology course. They must also discuss the study with a professor in this subject and secure approval.

MET 350 Cal/OSHA 10 General Safety

  • Same As:IMMT 140
  • Units:1
  • Hours:18 hours LEC
  • Prerequisite:None.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This class focuses on the training required for the 10-Hour Cal/OSHA General Industry Safety and Health training card program. Training includes safety policies, procedures, standards, and general industry safety and health principles. Topics for this course will include the following: Introduction to Occupational Safety and Health Administration (OSHA) and Cal/OSHA; Injury and Illness Prevention Programs and Heat Illness Prevention; Walking and Working Surfaces, Including Fall Protection; Electrical Hazards; Hazardous Materials; Health Hazards; Personal Protective Equipment; Tools and Equipment; Hazard Communication; Material Handling. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer. Students are required to pay the Cal/OSHA 10-Hour General Industry Card fee.

MET 351 Basic Mechanical Systems

  • Units:5
  • Hours:54 hours LEC; 108 hours LAB
  • Prerequisite:HVAC 250 with a grade of "C" or better
  • Advisory:MET 256, MET 257 and MET 352 with a grade of "C" or better or concurrent enrollment in MET 256, MET 257 and MET 352.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course is designed to introduce the student to the theoretical and practical applications of basic mechanical systems utilized in heating, ventilation, air conditioning, refrigeration, steam power generation, and the treatment of water for use in mechanical systems. Additional studies include fundamental laws of heat; theory of refrigeration and refrigerants; installation, operation, and testing of refrigeration units; and safe, efficient use of related hand, heat, and power tools. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 352 Mechanical Systems Calculations

  • Units:2
  • Hours:36 hours LEC
  • Prerequisite:HVAC 250 with a grade of "C" or better
  • Advisory:MET 256, MET 257, and MET 351 with a grade of "C" or better or concurrent enrollment in MET 256, MET 257, and MET 351.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course focuses on building mathematical skills specific to the mechanical-electrical trades: problem solving using metric (SI) units and English and metric unit conversions; solution of word problems involving length, area, volume, weight, work, power, energy, and efficiencies; exponents, and roots; problem solving using graphs and tables; and algebraic solutions to applied problems. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 357 Drawing Mechanical Systems

  • Units:1
  • Hours:18 hours LEC
  • Prerequisite:HVAC 250 with a grade of "C" or better
  • Corequisite:HVAC 351 and 352
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course focuses on building drawing skills specific to the mechanical-electrical trades; problem solving using graphs; freehand sketching employing multiview, isometric, and oblique drawing methods; and lettering and dimensioning. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 360 Mechanical Systems Maintenance

  • Units:1.5
  • Hours:18 hours LEC; 27 hours LAB
  • Prerequisite:HVAC 256, 257, 351, and 357 with grades of "C" or better
  • Corequisite:HVAC 363
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course introduces the student to maintenance concepts for basic mechanical systems. Units of instruction include safety, customer service skills, heating and cooling system maintenance, filter management, lubrication, belts and drives, and verifying equipment operation. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 361 Refrigeration Systems

  • Units:3
  • Hours:36 hours LEC; 54 hours LAB
  • Prerequisite:HVAC 351 with a grade of "C" or better
  • Advisory:MET 352 with a grade of "C" or better. Concurrent enrollment in MET 362, MET 363, and MET 364.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course is devoted to the study of residential and commercial refrigeration systems and equipment. Students learn about mechanical compression and refrigeration devices: their operating characteristics, common applications and typical servicing procedures, and related safety practices. Hand tools, power tools, and test instruments are used by the student in lab to repair and service refrigeration devices. Students gain additional experience by analyzing system performance with pressure-enthalpy diagrams. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 362 Refrigeration Systems Calculations

  • Units:3
  • Hours:54 hours LEC
  • Prerequisite:HVAC 351 and 352 with grades of "C" or better
  • Advisory:MET 361, MET 363, and MET 364 with a grade of "C" or better or concurrent enrollment in MET 361, MET 363, and MET 364.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course focuses on mathematical problems involving English and metric (SI) units concerned with installation, operations, and maintenance of commercial and industrial refrigeration systems. Emphasis will be placed on basic heat transfer, loads, piping, equipment performance, and economic factors. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 363 Refrigerant Transition and Recovery Processes and Procedures

  • Units:1.5
  • Hours:27 hours LEC
  • Prerequisite:HVAC 351 with a grade of "C" or better
  • Advisory:MET 361, MET 362, and MET 364 with a grade of "C" or better or concurrent enrollment in MET 361, MET 362, and MET 364.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course focuses on the recovery and recycling of existing refrigerants, the transition to environmentally safe refrigerants, and the preparation for certification testing in refrigerant handling as mandated by the Clean Air Act, 40 CFR, part 82, subpart F and regulated by the Environmental Protection Agency (EPA). Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 364 Electrical Controls

  • Units:3
  • Hours:36 hours LEC; 54 hours LAB
  • Prerequisite:HVAC 256, 351, 352, and 357 with grades of "C" or better
  • Advisory:MET 361, MET 362, and MET 363 with a grade of "C" or better or concurrent enrollment in MET 361, MET 362, and MET 363.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course provides instruction in power and control circuits and devices used with refrigeration, heating, cooling, and pumping mechanical systems. Units of instruction include a study of electron theory, magnetism, induction, alternating current, direct current, resistance, and capacitance. Students will practice using electrical meters and test instruments in the laboratory. Electrical safety practices will also be covered. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 371 Gas-Fired Heating Equipment

  • Units:3
  • Hours:36 hours LEC; 54 hours LAB
  • Prerequisite:HVAC 351, 360, and 364 with grades of "C" or better
  • Advisory:MET 372, MET 373, and MET 374 with a grade of "C" or better or concurrent enrollment in MET 372, MET 373, and MET 374.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course provides instruction on warm air furnaces, hydronic heating, steam boilers, and power plant systems. Instruction includes pumps, pumping head calculations, combustion principles, steam and hot water boilers, warm air furnaces, boiler safety and operating controls, and boiler emissions. Laboratory activities include operation, testing, maintenance, and troubleshooting of warm air furnaces and steam/hot water heating systems. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer. This course was formerly known as MET 371: Heating and Power Machinery.

MET 372 Power Machinery, Heating and Air Conditioning Calculations

  • Units:3
  • Hours:54 hours LEC
  • Prerequisite:HVAC 361 and 362 with grades of "C" or better
  • Advisory:MET 371, MET 373, and MET 374 with a grade of "C" or better or concurrent enrollment in MET 371, MET 373, and MET 374.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course focuses on mathematical problems involving English and metric (SI) units concerned with installation, operation, and maintenance of power machinery, and heating and air conditioning systems. Emphasis will be placed on heat transfer, heating and cooling loads, pipe and pump sizing, steam and hot water system performance, psychrometrics, and duct sizing calculations. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 373 Piping and Electrical Drafting and Blueprint Reading

  • Units:3
  • Hours:36 hours LEC; 54 hours LAB
  • Prerequisite:HVAC 360, 361, and 364 with grades of "C" or better
  • Advisory:MET 371, MET 372, and MET 374 with a grade of "C" or better or concurrent enrollment in MET 371, MET 372, and MET 374.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course provides instruction in the design of mechanical and piping systems. Units of instruction include mechanical, electrical, and plumbing codes, blueprint reading, recognition of standard symbols, computer-aided drawing applications, and construction terms and specifications. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer. This course was formerly known as MET 373: Piping, Electrical, and Sheet Metal Drafting.

MET 374 Automatic Control Systems I

  • Units:3
  • Hours:36 hours LEC; 54 hours LAB
  • Prerequisite:HVAC 361 and 364 with grades of "C" or better
  • Advisory:MET 372 and MET 373 with a grade of "C" or better or concurrent enrollment in MET 372 and MET 373.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This is the first of two courses (see MET 384) that focus on the study of controls and devices used in heating, ventilation, air conditioning, and pumping systems. Units of instruction include control theory, final control devices, and pneumatic control systems. Components of this course will be offered online. Students will need access to a computer running windows 10 or better with admin privileges and the Internet and have some familiarity with a computer.

MET 381 Air Conditioning

  • Units:3
  • Hours:36 hours LEC; 54 hours LAB
  • Prerequisite:HVAC 371 and 372 with grades of "C" or better
  • Advisory:HVAC 383 and 384 with grades of "C" or better; or concurrent enrollment in MET 383 and MET 384.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course provides instruction in the design, operation, and maintenance of commercial and industrial air conditioning systems. Instruction includes study of air distribution, variable air volume systems, refrigeration compressors, absorption air conditioning systems, helical-rotary and centrifugal water chillers, chilled water systems, thermal storage, cooling towers, and hot water solar systems, and energy management. Students will gain practical experience by operating commercial air conditioning systems. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 383 Instrumentation

  • Units:3
  • Hours:36 hours LEC; 54 hours LAB
  • Prerequisite:HVAC 371, 372, 373, and 374 with grades of "C" or better
  • Advisory:HVAC 381 and 384 with grades of "C" or better; or concurrent enrollment in MET 381 and MET 384.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course provides instruction in the theory and practice of using instruments for testing and analyzing the operation of refrigerating, air conditioning, mechanical, electrical, and building systems. Units of instruction include a study of measurement principles including temperature, humidity, flow, light, sound, velocity, pressure, combustion emissions, air quality, voltage, level, force, and vibration. Laboratory activities will emphasize the practical applications of sensors and measuring instruments. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

MET 384 Automatic Control Systems II

  • Units:3
  • Hours:36 hours LEC; 54 hours LAB
  • Prerequisite:HVAC 371 and 374 with grades of "C" or better
  • Advisory:HVAC 381 and 383 with grades of "C" or better; or concurrent enrollment in MET 381 and MET 383.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This is the second of two courses (see MET 374) that focus on the study of controls and devices used in heating, ventilation, air conditioning, and pumping systems. Units of instruction include electronic and direct digital controls, networks, interoperable systems, and the programming of controllers. Components of this course will be offered online. Students will need access to a computer running Windows 10 or better with admin privileges and the Internet and have some familiarity with a computer.

MET 388 Heat Pump Operation and Load Calculations

  • Units:3
  • Hours:36 hours LEC; 54 hours LAB
  • Prerequisite:HVAC 371, 372, and 373 with grades of "C" or better
  • Corequisite:HVAC 381, 383, and 384
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This course provides instruction in refrigeration and heat pump theory, cooling and heating cycles, defrost cycles, controls, supplemental heat, flow control devices, and heat load calculations. Students will need to have access to a computer and the Internet and have some familiarity with a computer. The course was formerly MET 368: Heat Pump Operation and Maintenance.

MET 495 Independent Studies in Mechanical-Electrical Technology

  • Units:1 - 3
  • Hours:54 - 162 hours LAB
  • Prerequisite:None.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

Independent Study is an opportunity for the student to extend classroom experience in this subject, while working independently of a formal classroom situation. Independent study is an extension of work offered in a specific class in the college catalog. To be eligible for independent study, students must have completed the basic regular catalog course at Sacramento City College. They must also discuss the study with a professor in this subject and secure approval. Only one independent study for each catalog course will be allowed.

MET 499 Experimental Offering in Mechanical-Electrical Technology

  • Units:0.5 - 4
  • Prerequisite:None.
  • Transferable:CSU
  • Catalog Date:August 1, 2026

This is the experimental courses description.

Catalog