Home Catalog Programs of Study List of Programs Industrial Maintenance Mechanic Technician

Catalog

Print Options

Download entire catalog

Industrial Maintenance Mechanic Technician

Overview Degrees/Certificates Courses

The Industrial Maintenance Mechanic Technology program provides entry level instruction in the installation, repair, and maintenance of a wide range of machinery found in the food processing, advanced manufacturing, and product distribution industries. The entry level skills covered include safety training and OSHA-10 Course Completion Certification, fundamentals of mechanical and electrical systems, industrial production equipment maintenance and repair, industrial process control programming, industrial robotic programming, maintenance and welding. These entry level skills are learned in both traditional lecture classes and hands-on training in sophisticated training laboratories. Effective writing, verbal communication, electronic communication, mechanical calculations, and computer skills are emphasized across the curriculum.

Degrees and Certificates Offered

A.S. in Electro-Mechanical Technician
Electro-Mechanical Technician Certificate
Industrial Controls Technician Certificate
Industrial Maintenance Technician Certificate

Dean Paul Estabrook
Department Chair Richard Gentry
Email gentryr@scc.losrios.edu

Associate Degree

A.S. in Electro-Mechanical Technician

This program introduces the student to the theoretical and practical applications of basic mechanical and control systems utilized in the industrial maintenance mechanic industry. Additional studies include plant safety, hand/power tool fundamentals, blueprint reading, principles of power transmission, properties of lubricants, shaft/coupling alignment, principles of fluid power, hydraulic, pneumatic, compressed air systems, conveyor systems, basic electrical concepts and controls, programable logic controllers and instrumentations, and introduction into robotics.

Catalog Date: August 1, 2024

Degree Requirements

Course Code	Course Title	Units
IMMT 120	Technical Documentation and Communication	2
IMMT 130	Technical Calculations	2
IMMT 140	Cal/OSHA 10 General Safety	1
IMMT 220	Industrial Mechanics I	3
IMMT 230	Industrial Electricity I	3
IMMT 240	Industrial Fluid Power I	3
IMMT 250	Industrial Control Systems I	3
IMMT 252	Industrial Control Systems II	3
Total Units:		20

The Electro-Mechanical Technician Associate in Science (A.S.) degree may be obtained by completion of the required program, plus general education requirements, plus sufficient electives to meet a 60-unit total. See SCC graduation requirements.

Student Learning Outcomes

Upon completion of this program, the student will be able to:

explain the theory and demonstrate practical applications of basic mechanical systems utilized in industrial production and product distribution industries.
apply problem solving and analytical thinking skills in the maintenance, testing, troubleshooting and repair of industrial mechanical/electrical equipment, industrial controls systems, and robotics.
apply technical math skills to solve problems involving electrical loads/wire sizing, gear ratios, pump flow rates, and pipe sizing.
interpret blueprints.

Career Information

This program provides entry level career skills required for a maintenance technician in the food processing, advanced manufacturing, and product distribution industries. Upon field experience and additional education, the student can transition into quality control systems technician, industrial engineering technician, industrial production manager, and industrial plant maintenance manager positions.

Certificates of Achievement

Electro-Mechanical Technician Certificate

Catalog Date: August 1, 2024

Certificate Requirements

Course Code	Course Title	Units
IMMT 120	Technical Documentation and Communication	2
IMMT 130	Technical Calculations	2
IMMT 140	Cal/OSHA 10 General Safety	1
IMMT 220	Industrial Mechanics I	3
IMMT 230	Industrial Electricity I	3
IMMT 240	Industrial Fluid Power I	3
IMMT 250	Industrial Control Systems I	3
IMMT 252	Industrial Control Systems II	3
Total Units:		20

Student Learning Outcomes

Upon completion of this program, the student will be able to:

explain the theory and demonstrate practical applications of basic mechanical systems utilized in industrial production and product distribution industries.
apply problem solving and analytical thinking skills in the maintenance, testing, troubleshooting and repair of industrial mechanical/electrical equipment, industrial controls systems, and robotics.
apply technical math skills to solve problems involving electrical loads/wire sizing, gear ratios, pump flow rates, and pipe sizing.
interpret blueprints.

Career Information

Industrial Controls Technician Certificate

This program introduces the student to the theoretical and practical applications of basic control systems utilized in the industrial maintenance mechanic industry. Additional studies include plant safety, hand/power tool fundamentals, blueprint reading, basic electrical concepts and controls, programable logic controllers and instrumentations, and introduction into robotics.

Catalog Date: August 1, 2024

Certificate Requirements

Course Code	Course Title	Units
IMMT 120	Technical Documentation and Communication	2
IMMT 130	Technical Calculations	2
IMMT 140	Cal/OSHA 10 General Safety	1
IMMT 230	Industrial Electricity I	3
IMMT 250	Industrial Control Systems I	3
IMMT 252	Industrial Control Systems II	3
Total Units:		14

Student Learning Outcomes

Upon completion of this program, the student will be able to:

apply problem-solving and analytical thinking skills in the maintenance, testing, troubleshooting and repair of industrial mechanical/electrical equipment, industrial controls systems, and robotics.
interpret blueprints.
describe basic electrical circuits and PLC/VFD control theory.
apply technical math skills to solve problems involving electrical loads/wire sizing, gear ratios, pump flow rates, and pipe sizing.

Career Information

Upon completion of the Industrial Controls Technician Certificate, students may find employment as a technician in food processing, advanced manufacturing, and packaging and assembly. Industrial Controls Technicians install, troubleshoot, repair and maintain commercial or industrial controls in buildings, a plant, or a manufacturing setting. These technicians ensure all controls function properly through servicing and troubleshooting the system.

Industrial Maintenance Technician Certificate

This program introduces the student to the theoretical and practical applications of basic mechanical systems utilized in the industrial mechanical industry. Additional studies include plant safety, hand/power tool fundamentals, blueprint reading, principles of power transmission, properties of lubricants, shaft/coupling alignment, principles of fluid power, hydraulic, pneumatic, compressed air systems and conveyor systems.

Catalog Date: August 1, 2024

Certificate Requirements

Course Code	Course Title	Units
IMMT 120	Technical Documentation and Communication	2
IMMT 130	Technical Calculations	2
IMMT 140	Cal/OSHA 10 General Safety	1
IMMT 220	Industrial Mechanics I	3
IMMT 240	Industrial Fluid Power I	3
Total Units:		11

Student Learning Outcomes

Upon completion of this program, the student will be able to:

demonstrate problem-solving abilities and practical analytical thinking skills.
explain the theory and demonstrate practical applications of basic mechanical systems utilized in industrial production and product distribution industries.
explain the theory and practical application of fluid power.

Career Information

Upon completion of the Industrial Maintenance Technician Certificate, students may find employment as a technician in food processing, advanced manufacturing, and packaging and assembly. Industrial Maintenance Technicians install, troubleshoot, repair and maintain commercial or industrial machinery in buildings, a plant, or a manufacturing setting. These technicians ensure all machines function properly through troubleshooting and preventative maintenance service.

Industrial Maintenance Mechanic Technician (IMMT) Courses

IMMT 120 Technical Documentation and Communication

Units:2
Hours:36 hours LEC
Prerequisite:None.
Catalog Date:August 1, 2024

This course provides the student with basic workplace skills needed to enter the workforce as an industrial maintenance mechanic technician. Units of instruction include technical writing, digital form comprehension, communication skills, writing e-mail messages, Internet websites, critical thinking, problem solving, and conflict resolution. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

IMMT 130 Technical Calculations

Units:2
Hours:36 hours LEC
Prerequisite:None.
Catalog Date:August 1, 2024

This course focuses on building mathematical skills specific to the industrial maintenance mechanic trades: problem solving using metric (SI) units and English and metric unit conversions; solution of word problems involving length, area, volume, weight, strength of materials, work, power, energy, and efficiencies; exponents problem solving using graphs and tables; and algebraic solutions to applied problems. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

IMMT 140 Cal/OSHA 10 General Safety

Same As:MET 350
Units:1
Hours:18 hours LEC
Prerequisite:None.
Catalog Date:August 1, 2024

This class focuses on the training required for the 10-Hour Cal/OSHA General Industry Safety and Health training card program. Training includes safety policies, procedures, standards, and general industry safety and health principles. Topics for this course will include the following: Introduction to Occupational Safety and Health Administration (OSHA) and Cal/OSHA; Injury and Illness Prevention Programs and Heat Illness Prevention; Walking and Working Surfaces, Including Fall Protection; Electrical Hazards; Hazardous Materials; Health Hazards; Personal Protective Equipment; Tools and Equipment; Hazard Communication; Material Handling. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer. Students are required to pay the Cal/OSHA 10-Hour General Industry Card fee.

IMMT 220 Industrial Mechanics I

Units:3
Hours:36 hours LEC; 54 hours LAB
Prerequisite:IMMT 120, 130, and 140 with grades of "C" or better
Catalog Date:August 1, 2024

This course is designed to introduce the student to the theoretical and practical applications of basic mechanical systems utilized in the industrial mechanical industry. Additional studies including plant safety, hand and power tool fundamentals, blueprint reading, principles of power transmission, properties of lubricants, shaft and coupling alignment, and conveyor systems. Components of this course will be offered online.
Students will need to have access to a computer, the Internet, and have some familiarity with a computer. This course was formerly known as IMMT 121.

IMMT 230 Industrial Electricity I

Units:3
Hours:36 hours LEC; 54 hours LAB
Prerequisite:IMMT 120, 130, and 140 with grades of "C" or better
Catalog Date:August 1, 2024

This course provides instruction in power and control circuits and devices used the industrial mechanical industry. Units of instruction include a study of electron theory, magnetism, induction, alternating current, direct current, resistance, capacitance, transformers, electric motors, industrial equipment wiring diagrams, and electrical troubleshooting. Students will practice using electrical meters and test instruments in the laboratory. Electrical safety practices will also be covered. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

IMMT 240 Industrial Fluid Power I

Units:3
Hours:36 hours LEC; 54 hours LAB
Prerequisite:IMMT 120, 130, and 140 with grades of "C" or better
Catalog Date:August 1, 2024

This course provides instruction in the principles of fluid power, hydraulic, pneumatic, and compressed air systems. Laboratory activities include operation, testing, maintenance, and troubleshooting of hydraulic, pneumatic, and compressed air systems. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

IMMT 250 Industrial Control Systems I

Units:3
Hours:36 hours LEC; 54 hours LAB
Prerequisite:IMMT 230 with a grade of "C" or better
Catalog Date:August 1, 2024

This course provides instruction in the fundamentals and programming of Programmable Logic Controls (PLC) and Variable Frequency Drives (VFD). Additional studies include Servo Divers, Industrial Sensors, and Instrumentation. Components of this course will be offered online. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

IMMT 252 Industrial Control Systems II

Units:3
Hours:36 hours LEC; 54 hours LAB
Prerequisite:IMMT 250 with a grade of "C" or better
Catalog Date:August 1, 2024

This course provides instruction in the fundamentals, design, programming, operations, and troubleshooting of industrial equipment. Students will need to have access to a computer and the Internet and have some familiarity with a computer.

IMMT 299 Experimental Offering in Industrial Maintenance Mechanic Technician

Units:0.5 - 4
Prerequisite:None.
Catalog Date:August 1, 2024

This is the experimental courses description.

IMMT 499 Experimental Offering in Industrial Maintenance Mechanic Technician

Units:0.5 - 4
Prerequisite:None.
Catalog Date:August 1, 2024

This is the experimental courses description.